Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines

In the paper an important issue of vibrations of the transmission line in real conditions was analyzed. Such research was carried out by the authors of this paper taking into account the cross-section of the cable being in use on the transmission line. Analysis was performed for the modern ACSR high voltage transmission line with span of 213.0 m. The purpose of the investigation was to analyze the vibrations of the power transmission line in the natural environment and compare with the results obtained in the numerical simulations. Analysis was performed for natural and wind excited vibrations. The numerical model was made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response was checked and compared with the results of the accelerations obtained in the situ measurements. A frequency response functions (FRF) were calculated. The credibility of the model was assessed through a validation process carried out by comparing graphical plots of FRF functions and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. Particular attention was paid to the hysteretic damping analysis. Sensitivity of the wave number was performed for changing of the tension force and section area of the cable. The next aspect constituting the purpose of this paper was to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show very good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, cable cross-section,tensile strength or material damping can be studied.     

一种考虑界面相物性影响的界面单元法

界面是由复杂的界面相简化而成的,界面破坏实际是界面相材料的破坏。数值计算为了方便,如经典模型和内聚力模型等,都把很薄的界面相作无厚度化处理。导致只能考虑界面的面力,而无法考虑界面相内的应力(平行于界面方向的应力)。使界面失效准则先天性地排除了界面相内部应力的影响,从界面相材料失效机理的角度来看这是不够严谨的。本文将界面相材料等效为一种弹性连续体,由界面本构关系推导得到了一种新的界面单元。该单元具有界面参数易确定、对界面相物性可以进行等效描述等优点。通过商用有限元软件ABAQUS和用户子程序UEL实现了数值分析,并与直接物理模型的数值模拟结果进行对比,证明了本方法的简便及准确性。通过对不同界面相厚度结构的进一步分析,探讨了本文方法的可行范围。     

Index transforms with the squares of Kelvin functions

New index transforms, involving squares of Kelvin functions, are investigated. Mapping properties and inversion formulas are established for these transforms in Lebesgue spaces. The results are applied to solve a boundary value problem on the wedge for a fourth order partial differential equation.     

Conical Kakeya and Nikodym sets in finite fields

A Kakeya set contains a line in each direction. Dvir proved a lower bound on the size of any Kakeya set in a finite field using the polynomial method. We prove analogues of Dvir's result for non-degenerate conics, that is, parabolae and hyperbolae (but not ellipses which do not have a direction). We also study so-called conical Nikodym sets where a small variation of the proof provides a lower bound on their sizes. (Here ellipses are included.)Note that the bound on conical Kakeya sets has been known before, however, without an explicitly given constant which is included in our result and close to being best possible.     

Local Sensitivity Analysis in Estimation Problems

This article deals with the problem of local sensitivity analysis, that is, how sensitive are the results of a statistical analysis to changes in the data? A general methodology of sensitivity analysis is applied to some statistical problems. The proposed methods are applicable to any statistical problem that can be expressed as an optimization problem or that involves solving a system of equations. As some particular examples, the methodology is applied to the maximum likelihood method, the standard and constrained methods of moments and the standard and constrained probability weighted moments methods. Unlike the standard method of moments, the constrained method of moments ensures that the obtained estimates are always consistent with the data. Closed analytical formulas for the calculation of these local sensitivities are derived. The obtained sensitivities include: (a) the objective function sensitivities to data points and (b) the sensitivities of the estimated parameters to data points. The derived formulas for the sensitivities are based on recent results in the area of mathematical programming. Several examples of parameter estimation problems are used to illustrate the methodology.     

Nonsmooth analysis of vector-valued mappings with contributions to nondifferentiable programming

We define order Lipschitz mappings from a Banach space to an order complete vector lattice and present a nonsmooth analysis for such functions. In particular, we establish properties of a generalized directional derivative and gradient and derive results concerning a calculus of generalized gradients (i.e., calculation of the generalized gradient of f when f = f₁ + f₂, f = f · ₂, etc.). We show the relevance of the above analysis to nondifferentiaile programming by deriving optimality conditions for problems of the form min f(x) subject to x [euro] S. For S arbitrary we state the results in terms of cones of displacement of the feasible region at the optimal point; when S ={x ? A|g(x) ? B}, we obtain Kuhn-Tucker type results.     

Next-generation NATO reference mobility model complex terramechanics – Part 2: Requirements and prototype

In part 2 of this paper, the Complex Terramechanics (CT) software tools requirements recommended by the NATO research task group RTG-248 are presented along with example simulations from a CT prototype software tool which attempts to satisfy the requirements.     

Numerical solution for the anisotropic Willmore flow of graphs

The Willmore flow is well known problem from the differential geometry. It minimizes the Willmore functional defined as integral of the mean-curvature square over given manifold. For the graph formulation, we derive modification of the Willmore flow with anisotropic mean curvature. We define the weak solution and we prove an energy equality. We approximate the solution numerically by the complementary finite volume method. To show the stability, we re-formulate the resulting scheme in terms of the finite difference method. By using simple framework of the finite difference method (FDM) we show discrete version of the energy equality. The time discretization is done by the method of lines and the resulting system of ODEs is solved by the Runge–Kutta–Merson solver with adaptive integration step. We also show experimental order of convergence as well as results of the numerical experiments, both for several different anisotropies.     

Rapid simulation procedure for fretting wear on the basis of the method of dimensionality reduction

We suggest a numerical procedure for rapid simulation of fretting wear in a contact of two bodies subjected to tangential oscillations with a small amplitude. The incremental wear in each point of contact area is calculated using the Reye–Archard–Khrushchov wear criterion. For applying this criterion, the distributions of pressure and relative displacements of bodies are required. These are calculated using the method of dimensionality reduction (MDR).